Düüs 0.4mm M6 MK8 kõvasulam teras (iD 1.75mm)

Düüs 0.6mm M6 V5/V6 messing (iD 1.75mm)

Düüs 0.8mm M6 V5/V6 messing (iD 1.75mm)

Düüs 1.0mm M6 V5/V6 messing (iD 1.75mm)

1.75mm 1kg PLA oranž filament, Carrot Orange, RAL2008, Spectrum

1.75mm 1kg PLA tumehall filament, Dark Grey, RAL7011, Spectrum

This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). It operates from 8.2 V to 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling). The driver has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver carriers, so it can be used as a higher-performance drop-in replacement for those boards in many applications. Key features: Simple step and direction control interface Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step Adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay) 45 V maximum supply voltage Built-in regulator (no external logic voltage supply needed) Can interface directly with 3.3 V and 5 V systems Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout Short-to-ground and shorted-load protection 4-layer, 2 oz copper PCB for improved heat dissipation Exposed solderable ground pad below the driver IC on the bottom of the PCB

Kuumutusplaadi matt 235x235mm kleebitav sinine NB! 3D printer ei kuulu komplekti!

Kuumutusplaadi magnetmatt 235x235mm 2-osaline kleebitav must NB! 3D printer ei kuulu komplekti!

Dual Z axis upgrade kit, Ender 3, CR-10 Package Contents: 1x 34mm stepper motor 2x Z axis lead screw bearing guide 2x power supply holder 1x T8 lead screw coupler 1x Z axis lead screw bracket 1x motor cable 1x motor mount 1x T8 lead screw (365mm) 1 pack matching screws and tools 1x user's manual NB! 3D printer ei kuulu komplekti!

V-slot 20mm profiili eksentrik 3D printerile HEX mõõt: 10mm HEX kõrgus: 7.85mm Ava läbimõõt: 5mm Kogu kõrgus: 10.55mm

Düüs 0.2mm M6 MK8 messing Sobib paljudele 3D printeritele sh: Creality: CR-10, CR-10S, Ender 3, Ender 5 MakerBot: Replicator 2 / 2X

Düüs 0.3mm M6 MK8 messing Sobib paljudele 3D printeritele sh: Creality: CR-10, CR-10S, Ender 3, Ender 5 MakerBot: Replicator 2 / 2X

Düüs 0.4mm M6 MK8 messing Sobib paljudele 3D printeritele sh: Creality: CR-10, CR-10S, Ender 3, Ender 5 MakerBot: Replicator 2 / 2X

Düüs 0.5mm M6 MK8 messing Sobib paljudele 3D printeritele sh: Creality: CR-10, CR-10S, Ender 3, Ender 5 MakerBot: Replicator 2 / 2X

Düüs 0.6mm M6 MK8 messing Sobib paljudele 3D printeritele sh: Creality: CR-10, CR-10S, Ender 3, Ender 5 MakerBot: Replicator 2 / 2X

Düüs 0.8mm M6 MK8 messing Sobib paljudele 3D printeritele sh: Creality: CR-10, CR-10S, Ender 3, Ender 5 MakerBot: Replicator 2 / 2X

Düüs 1.0mm M6 MK8 messing Sobib paljudele 3D printeritele sh: Creality: CR-10, CR-10S, Ender 3, Ender 5 MakerBot: Replicator 2 / 2X

Düüs 0.3mm M6 V5/V6 roostevaba teras

Düüs 0.2mm M6 messing Sobib V5 ja V6 peale

Düüs 0.3mm M6 messing Sobib V5 ja V6 peale

Düüs 0.4mm M6 messing Sobib V5 ja V6 peale

Düüs 0.5mm M6 messing Sobib V5 ja V6 peale

Ender-3 CR-10 brass 40 teeth Extrusion wheel

Bowden-toru PTFE 1,75mm 2/4mm 1m must

Filamendi andur juhtmega, must 1.75mm filamendile Juhtme pikkus 1m Kaal 18g

1.75mm 10m PLA pärli valge

1.75mm 10m PLA puidu tooni